This article comes from The Spruce.
How to Clean a Shag Rug
Shag rugs are back in style and even more spectacular than the 1970s versions. More often sold as an area rug than wall-to-wall carpeting, designers have embraced different materials, from wool to leather, and every color imaginable. Shag rugs add a designer touch and are also warm and cozy underfoot—a decorating win-win.
Because of the long, plushy pile, shag rugs do require more maintenance than thinner, flatter rugs to look good. The long fibers trap more dust and dirt than flatter weaves. Fortunately, the cleaning of shag rugs isn’t difficult, it just requires a bit of time.
How Often to Clean a Shag Rug
Ideally, a shag or frieze pile rug that receives regular foot traffic should be vacuumed daily to keep the pile fluffy and to remove dust and debris, especially if you have pets. Realistically, vacuuming a couple of times a week should keep the rug clean.
Spills and stains should be blotted away as quickly as possible and spot-treated. A more thorough deep cleaning is recommended monthly or as needed.
Routine Shag Rug Cleaning
1. Shake Away the Dirt
If the rug is small enough to pick up easily, take it outside and give it a good shake. Another way to get rid of dust and dirt trapped in the fibers is to drape the rug over a railing or sturdy clothesline and beat it with a broom or old tennis racket. An amazing amount of soil will be released.
2. Vacuum the Rug
The best way to vacuum a shag rug is by using a canister vacuum with the hose and upholstery attachment: The more gentle suction will keep the rug loops from being pulled too harshly.
If you only have an upright vacuum, set the cleaning head to the highest pile setting and disengage the beater bar. If your vacuum cannot make these adjustments, do not use it on a shag rug.
With the proper vacuum settings in place, suction out the dust and dirt. Work in a grid, overlapping each stroke to produce the best results.
Turn the rug over and change the vacuum settings to the lowest pile setting, engage the beater bar, and vacuum the underside to trap embedded dirt. Don’t forget to vacuum the flooring beneath the rug, too.
3. Check for and Treat Stains
Flip the rug back over and inspect it for any stains. Spot treat the stained areas following stain removal guidelines for specific stains. Most stains can be removed by mixing a few drops of dishwashing liquid in a cup of warm water. Dip a soft-bristled brush or microfiber towel in the solution and gently rub the stain. Finish by dipping a clean towel in plain water to rinse the area and blotting the carpet with a dry towel.
Hang the rug to dry or elevate the cleaned section so there is airflow around the damp area, allowing it to dry as quickly as possible.
4. Lift the Pile
If the pile isn’t as fluffy as you’d like, use your hands, a carpet rake, or a child’s plastic garden rake to lift the fibers. Be gentle—no tugging!
Click here to continue reading this article.